maineventheel
Superstar
Joined on: Jan 27, 2015 9:29:11 GMT -5
Posts: 915 
|
Post by maineventheel on Sept 2, 2015 7:45:52 GMT -5
I had a elite figure fall and broke at the leg joint. What's he best way to repair it
|
|
bigjohn8
Superstar
Joined on: Aug 24, 2015 9:57:39 GMT -5
Posts: 515
|
Post by bigjohn8 on Sept 2, 2015 20:01:40 GMT -5
Leg joint by the crotch? That's almost broken. Unless your willing try and crack the torso and crotch are to replace the ball joints. ( no pun intended). But you risk breaking it if ou try to crack the torso. So there's nothing to loose. Google or you tube cracking mattel elite torso and crotch
|
|
|
|
Post by l on Sept 2, 2015 22:23:34 GMT -5
I had a elite figure fall and broke at the leg joint. What's he best way to repair it What figure is it? If you feel confident cracking the torso and crotch off, I could probably find a spare piece that goes inside the crotch. If you could take a picture of the figure and the joint I can look and see. Its way easier with the newer style of hip joints. |
|
maineventheel
Superstar
Joined on: Jan 27, 2015 9:29:11 GMT -5
Posts: 915
|
Post by maineventheel on Sept 3, 2015 4:05:15 GMT -5
It's elite Luke Gallows
|
|
|
|
Post by joesgonnakillyou on Sept 3, 2015 20:18:17 GMT -5
I spent 3 months trying to figure out a fix to this problem. Take a very small drill bit and drill into the peg that broke, both on the leg and the crotch. Get a small paneling nail and cut off the head. Apply a small amout of superglue to the hole in the peg of the crotch then insert the nail half way. Once this is dry, repeat the process by attaching the leg to the nail. Once dry, you will have full articulation again.
|
|
jplendo
Mid-Carder
Joined on: Jan 10, 2023 12:08:52 GMT -5
Posts: 91
|
Post by jplendo on May 18, 2023 10:52:57 GMT -5
I know this thread is 8 years old, but just wanted to say this process works REALLY well. I had my Dusty Rhodes elite fall and his leg broke off at the crotch peg. Doing the process mentioned above made the leg seem like it was never broken.
|
|
spikelander
Jobber
Joined on: Dec 17, 2020 12:23:41 GMT -5
Posts: 22
|
Post by spikelander on Jun 6, 2023 10:36:58 GMT -5
I have this same problem with my kane elite but I have no clue where to get more ball joints
|
|
2sweeeeet
Main Eventer
Joined on: Jun 7, 2017 22:08:25 GMT -5
Posts: 2,035
|
Post by 2sweeeeet on Jun 6, 2023 10:46:47 GMT -5
To add to what was said earlier, here is a video showing how to do so.
|
|
