TheXtremisT
Main Eventer
10 Year Member
This is the way
Joined on: May 3, 2008 8:03:15 GMT -5
Posts: 3,951
|
Post by TheXtremisT on Jul 23, 2024 11:36:57 GMT -5
I made a post on IG showing how I swapped elite 100 Rock lower half onto the new style UE torso from the Target Rock. You don't need to reinforce the areas I did with sculpt. I only did that because that Rock torso has ridiculously brittle inner workings. Basically you need to cut away and ground out some of that white rubbery plastic block. http://instagram.com/p/CyPGwVCNTiZ |
|
|
|
Post by WCWThunderRosa on Jul 23, 2024 19:14:20 GMT -5
Are there any 2006-2012 Taker elites on ball joints?
|
|
Camp Cornette
Mid-Carder
Joined on: Jun 27, 2024 13:23:35 GMT -5
Posts: 214
|
Post by Camp Cornette on Jul 23, 2024 21:12:42 GMT -5
That's an awesome rock but that's a lot of modding unfortunately
Thanks Bill
|
|
Papi Joker
Main Eventer
INTERNATIONAL COLLECTORS LIVES MATTER
Joined on: Feb 23, 2016 23:56:30 GMT -5
Posts: 1,603
|
Post by Papi Joker on Jul 24, 2024 18:56:14 GMT -5
That's an awesome rock but that's a lot of modding unfortunately Thanks Bill yeah that's what I mean, it ain't a PREMIUM PRODUCT if you have to make it all yourself!!! |
|
Ric Flair Drip
Mid-Carder
Joined on: Jun 16, 2024 8:01:10 GMT -5
Posts: 71
|
Post by Ric Flair Drip on Jul 24, 2024 19:00:36 GMT -5
Lazy fix up...popped a he who shall not be named head on a 109 Cody body...  Nice has anyone tried this with flair yet to get a better suited flair |
|
|
|
Post by JokerFC on Jul 26, 2024 4:25:38 GMT -5
any suggestions for a Bart Gunn head? Billy unveiled at SDCC but I'm guessing they dont have the rights to Bart.
|
|
|
|
Post by cuppacoffeeyeaaah on Jul 26, 2024 8:08:48 GMT -5
any suggestions for a Bart Gunn head? Billy unveiled at SDCC but I'm guessing they dont have the rights to Bart. Rick Rude Coliseum Collection? |
|
Apocalypse
Superstar
Joined on: Nov 17, 2021 19:40:02 GMT -5
Posts: 782
|
Post by Apocalypse on Jul 26, 2024 10:28:29 GMT -5
any suggestions for a Bart Gunn head? Billy unveiled at SDCC but I'm guessing they dont have the rights to Bart. I feel like you could take almost any generic head, sculpt a moustache and swap billys hair painted darker on it and it would work. You could also get one from warsmans 3d sculpts |
|
monroe
Mid-Carder
Joined on: Mar 1, 2018 14:59:57 GMT -5
Posts: 464 
|
Post by monroe on Jul 29, 2024 12:22:44 GMT -5
Does anyone know if the original ringside Cactus Jack figure has ratchet hips or balljoints?
|
|
|
|
Post by Mr. #1derful 🇵🇸 on Jul 29, 2024 15:36:41 GMT -5
Does anyone know if the original ringside Cactus Jack figure has ratchet hips or balljoints? Ratchet. |
|
WMDman
Main Eventer
WF 10 Year Member
Joined on: Jan 6, 2013 10:18:05 GMT -5
Posts: 4,482
|
Post by WMDman on Jul 29, 2024 15:53:11 GMT -5
anyone know if you could put elite boots on the new elite kickpad calf mold?
-WMD
|
|
|
|
Post by shanieomaniac on Jul 30, 2024 1:38:56 GMT -5
"Hockey Brutes" Sami Zayn and Kevin Owens
Formulas:
Sami:
Torso: Elite 91 (Repainted)
Hands: The Goon (Gloves)
Legs: Basic 145 (Decal added)
Boots: Elite 51 (Repainted)
Head: Not sure, it's a recent one
Stick: The Goon (Repainted)
Custom Jersey
Kevin:
Body: Survivor Series '24 (Shoes painted red)
Hands: The Goon (Gloves)
Head: Survivor Series '24 (Repainted)
Stick: The Goon (Repainted)
Custom Jersey
And as for the two little guys on either side, they were custom creations I bought from a friend  |
|
mikedanger
Superstar
Joined on: Jun 12, 2023 14:45:38 GMT -5
Posts: 780
|
Post by mikedanger on Jul 30, 2024 7:53:28 GMT -5
Those are great!!
|
|
JKLMD2002
Main Eventer
Joined on: Sept 15, 2004 11:36:55 GMT -5
Posts: 1,412
|
Post by JKLMD2002 on Jul 30, 2024 18:50:20 GMT -5
Is there a figure that uses the Keith Lee Elite torso? Couldn't place one through my collection. Thinking it might work better for Terry Gordy.
|
|
Apocalypse
Superstar
Joined on: Nov 17, 2021 19:40:02 GMT -5
Posts: 782
|
Post by Apocalypse on Jul 31, 2024 15:40:04 GMT -5
Normally i dont show anything at this stage but im working on a U.E Million Dollar Man with a plastic suit instead of the barbie suit the c.c is coming with Now i really hope the jacket fits this body or im gonna be screwed  |
|
|
|
Post by Back to the Codyverse on Aug 1, 2024 7:56:01 GMT -5
TheXtremisT I followed your method you posted above on the ultimate torso swap mods. I tried with the new Target undertaker but was unsuccessful. I could get everything to fit flush and tight but the torso would still just pull straight off the peg(pulling upward) I feel like the elite trunks peg wasn't wide enough to stay in tight but I also may not have stiffened the little clip that broke enough(where you used molding) Do you think the broken clip was probably my main issue? I've got another Taker coming today and I'd like to try again
|
|
elrey82
Main Eventer
L.I. IN THE HOUSE!!!
Joined on: Oct 3, 2009 14:01:39 GMT -5
Posts: 1,747
|
Post by elrey82 on Aug 1, 2024 10:49:52 GMT -5
|
|
TheXtremisT
Main Eventer
10 Year Member
This is the way
Joined on: May 3, 2008 8:03:15 GMT -5
Posts: 3,951
|
Post by TheXtremisT on Aug 1, 2024 11:10:14 GMT -5
TheXtremisT I followed your method you posted above on the ultimate torso swap mods. I tried with the new Target undertaker but was unsuccessful. I could get everything to fit flush and tight but the torso would still just pull straight off the peg(pulling upward) I feel like the elite trunks peg wasn't wide enough to stay in tight but I also may not have stiffened the little clip that broke enough(where you used molding) Do you think the broken clip was probably my main issue? I've got another Taker coming today and I'd like to try again Sorry to hear that dude. If you could send pictures to me on IG or even a video call, I could see about helping you throughout as best I can from behind a screen lol |
|
|
|
Post by Back to the Codyverse on Aug 1, 2024 11:31:38 GMT -5
TheXtremisT I followed your method you posted above on the ultimate torso swap mods. I tried with the new Target undertaker but was unsuccessful. I could get everything to fit flush and tight but the torso would still just pull straight off the peg(pulling upward) I feel like the elite trunks peg wasn't wide enough to stay in tight but I also may not have stiffened the little clip that broke enough(where you used molding) Do you think the broken clip was probably my main issue? I've got another Taker coming today and I'd like to try again Sorry to hear that dude. If you could send pictures to me on IG or even a video call, I could see about helping you throughout as best I can from behind a screen lol Thank you. I'm going to attempt another Undertaker swap and follow your steps. If I run into issues I will reach out via Instagram Thanks again |
|
MonsoonMan
Main Eventer
SE Wisconsin, NE Illinois figure hunter.
Joined on: Jan 1, 2012 22:47:05 GMT -5
Posts: 2,451
|
Post by MonsoonMan on Aug 1, 2024 22:28:41 GMT -5
|
|
