grandmasterPRA
Main Eventer
WF 10 Year Member
Rise Above Being Boring
Joined on: Jun 12, 2002 17:51:32 GMT -5
Posts: 1,128
|
Post by grandmasterPRA on Jan 14, 2017 15:47:01 GMT -5
Does anybody have any experience attempting 3d print your own wrestling figure heads?
|
|
|
|
Post by J'Dinkalage Morgoone on Jan 16, 2017 13:09:42 GMT -5
most of the time items that are 3d printed need to be sanded down quite a bit. not sure if itd work on such a small item
|
|
|
|
Post by 666erickana on Jan 17, 2017 11:18:57 GMT -5
I really want to see a dino bravo head, but please post any head you did , im really interested by this
|
|
|
|
Post by Gorilla on Jan 26, 2017 11:46:32 GMT -5
Does anybody have any experience attempting 3d print your own wrestling figure heads? SOrry, I just created a very similar thread. I will delete mine. |
|
|
|
Post by tehforoh on Jan 26, 2017 14:38:35 GMT -5
I had mixed results. Mattel sized are too small and you lose a lot of detail. I resized it to be about 2 inches and got better results. I ordered one from a online print shop mattel sized and had much better results. It really depends on your printer what settings you use. |
|
grandmasterPRA
Main Eventer
WF 10 Year Member
Rise Above Being Boring
Joined on: Jun 12, 2002 17:51:32 GMT -5
Posts: 1,128
|
Post by grandmasterPRA on Jan 26, 2017 14:52:47 GMT -5
I had mixed results. Mattel sized are too small and you lose a lot of detail. I resized it to be about 2 inches and got better results. I ordered one from a online print shop mattel sized and had much better results. It really depends on your printer what settings you use. Yea the lines are something that is really tough to deal with. My brother printed a Han Solo head with it and it came out looking pretty good, but like you said it was a tiny bit bigger than a mattel head so it is hard to say what it would have looked like. Which website did you order the final head online at? |
|
|
|
Post by tehforoh on Jan 26, 2017 22:56:31 GMT -5
I had mixed results. Mattel sized are too small and you lose a lot of detail. I resized it to be about 2 inches and got better results. I ordered one from a online print shop mattel sized and had much better results. It really depends on your printer what settings you use. Yea the lines are something that is really tough to deal with. My brother printed a Han Solo head with it and it came out looking pretty good, but like you said it was a tiny bit bigger than a mattel head so it is hard to say what it would have looked like. Which website did you order the final head online at? An acetone bath could help smooth the lines but would also likely remove any real detail. I ordered the head from Shapeways. |
|
|
|
Post by Gorilla on Jan 27, 2017 15:32:15 GMT -5
If you sent a scan of Owen Hart, would it be possible to get one made?
Just wondering
|
|
|
|
Post by Glorydaysofwrestling on Jan 28, 2017 13:23:39 GMT -5
Really interested in this process.
|
|
|
|
Post by Next Manufactured’s Sweater on Jan 28, 2017 19:57:23 GMT -5
If you sent a scan of Owen Hart, would it be possible to get one made? Just wondering It's kind of irrelevant unless someone has the data from old Jakks scans of Owen Hart or something. And I'm not sure they'd even started scanning guys when Owen was around. |
|
|
|
Post by Nivro™ on Jan 28, 2017 20:08:19 GMT -5
I believe Warsman tried this a few years ago. I dont know if he ever got his Owen made or not though. Honestly the best route to go about it is to have a head done in something like a 1:12 scale and then send it to someone who resizes heads down to Mattel/Jakks size.
|
|
|
|
Post by tehforoh on Jan 28, 2017 20:50:49 GMT -5
If you sent a scan of Owen Hart, would it be possible to get one made? Just wondering Through shapeways or a different online print shop it should work well enough. |
|
|
|
Post by Gorilla on Jan 28, 2017 23:29:47 GMT -5
If you sent a scan of Owen Hart, would it be possible to get one made? Just wondering Through shapeways or a different online print shop it should work well enough. You could get a 3D scan of Bret and modify it I guess? |
|
dimshady
Main Eventer
Can never get his Avater to work!
Joined on: Dec 3, 2006 9:33:28 GMT -5
Posts: 1,749
|
Post by dimshady on Jan 29, 2017 5:47:36 GMT -5
The only scan of Owen I know off will be from ATTITUDE And Warzone games.
But you are right figure scans didn't happen while Owen was with us.
|
|
|
|
Post by tehforoh on Jan 29, 2017 13:08:01 GMT -5
The only scan of Owen I know off will be from ATTITUDE And Warzone games. But you are right figure scans didn't happen while Owen was with us. Wouldn't be a bad starting point. The only scan of Owen I know off will be from ATTITUDE And Warzone games. But you are right figure scans didn't happen while Owen was with us. He was also on Showdown: Legends of Wrestling. While that wouldn't be a scan it would be a higher res model than the attitude games. |
|
Deleted
Joined on: Nov 24, 2024 9:00:00 GMT -5
Posts: 0
|
Post by Deleted on Feb 5, 2017 4:55:06 GMT -5
How much is a 3D printer?
|
|
Henchmen4Hire
Main Eventer
Joined on: Jan 12, 2016 23:48:35 GMT -5
Posts: 1,311
|
Post by Henchmen4Hire on Feb 7, 2017 20:05:57 GMT -5
Always glad to see 3D printing and action figures mixed together  Just to toss it out there: In general, older video games use low-resolution models, which aren't good for 3D printing because they don't have any detail. For example, if you tried to 3D print a low-resolution model of a ball, you end up with a highly faceted roughly spherical shape, nothing like the smooth ball you wanted. And then you have to factor in what resolution your printer is capable of... How much is a 3D printer? Like...a million dollars lol. I think decent ones (printers that don't leave a bunch of lines in the model) start at around $5,000 or something. |
|
