hbkowns
Main Eventer
Joined on: Aug 15, 2011 23:33:52 GMT -5
Posts: 4,294
|
Post by hbkowns on Sept 13, 2017 0:10:29 GMT -5
So I vowed that I wouldn't pick this up because I didn't appreciate the low ropes and plastic molded turnbuckles. But when I saw this sitting on a TRU shelf for the low low low low low price of $99.99 (sarcasm), I just couldn't resist because I wanted to be wrong about this ring plus the Goldberg. I wanted it to be awesome, but unfortunately I was right. Let's get to the review.  So I'm going to say this right off the bat, this was the longest I took to build a wrestling figure ring. The fact that the frame comes in four parts instead of 2 is quite annoying. Not all of the grooves fit correctly and once they are all in place they sit uneven, especially when the ropes are together, it yanks the pieces of the frame and makes the ring lop-sided. I quite like the scale of the ring, it would have been perfect if they didn't use basic ring turnbuckles and actually had posts and ropes that sat higher to scale. But to me, the light-effects are really cool, but isn't worth the purchase. This ring is okay, but not better than the ASR by any means. Overall: 7/10       I also wanted to point out that my announce table has warped pieces and doesn't click in on the side correctly. It's disappointing because I have two mattel announce tables and both are warped. So be prepared if yours is messed up as well.  Now this Goldberg is really really nice, I didn't like the initial pics I first saw, but in hand it is spot on. The height, the scale, and even the attire are perfect even though they are simple. I think they did a little too much with the beard as its a bit too bushie, and the face is a little too long, but boy this is a hell of a release that I'm sure everyone will want. I recommend this figure, but not the ring. Until the flashback Goldberg gets released and we see how it looks, this might be the best Goldberg figure I've ever seen, it's just a shame mattel is having us pay $100 for this ring when we mostly just want the Goldberg as a solo release. Overall: 9/10       |
|
|
|
Post by dylan on Sept 13, 2017 0:20:28 GMT -5
Nice pics. The more I see it, the more I want it
|
|
powerfred3k
Main Eventer
Joined on: Aug 12, 2012 22:12:11 GMT -5
Posts: 3,784
|
Post by powerfred3k on Sept 13, 2017 0:46:39 GMT -5
Pass, I don't want the ring. It cost too much and not liking the goldberg headscan either.
|
|
|
|
Post by mcfclee on Sept 13, 2017 0:47:22 GMT -5
Great review.
|
|
Deleted
Joined on: Nov 30, 2024 19:32:09 GMT -5
Posts: 0
|
Post by Deleted on Sept 13, 2017 2:06:11 GMT -5
Ugh, if only these ropes were the right height, I would for sure already own it. Maybe I'll sit on it for a few months, see how it is during Black Friday
|
|
PaqMan
Mid-Carder
I spend too much time writing figure storylines lol
Joined on: May 5, 2005 3:31:55 GMT -5
Posts: 358
|
Post by PaqMan on Sept 13, 2017 21:21:26 GMT -5
Thanks for the review.
I'm definitely passing on it -- the rope height is the biggest killer for me. Literally everything else I can forgive, just not that for something I'm playing with. Moves like baseball slides seem like they're impossible here. Same with run ins lol.
I liked the scale from the photos, too, just really wish Mattel didn't cheap out on things. Now they're gonna sit on these and say high end rings don't sell. Whatever. Don't really care for that Goldberg either. I understand the appeal, but not worth $99.
Like I said in the other post, I just hope Wicked Cool Toys has some kind of plan to modernized the ASR for those who own it already. I plan on keeping mine for awhile.
|
|
|
|
Post by Xæro #FakeCollector on Sept 13, 2017 21:58:48 GMT -5
Ugh, I really want that Goldberg but I just can't justify paying for a ring I have no interest in.
|
|
|
|
Post by SteveHulk on Sept 13, 2017 22:51:58 GMT -5
Goldberg was/is one of my main wants - but I've gotta say I'm pretty disappointed in this figure... the scan is good, but the (crazy!) length and color of the beard really lets it down, IMO.
|
|
|
|
Post by BCizzle on Sept 13, 2017 23:42:21 GMT -5
Maybe someday they'll release Hollywood Hogan with a $200 ring!
I know, I know, don't give Bill any ideas...
|
|
|
|
Post by WalterF on Sept 14, 2017 1:41:07 GMT -5
So torn on this. I really really like the scale of the ring, it's the closest to accurate we've gotten and that's a big deal to me but parts of it definitely seem cheaper and less detailed than the ASR (the turnbuckle detail and post height being the most glaring examples). Haven't seen it at retail yet but still on the fence ..... knowing how much I enjoy buying rings I'll prob buy it haha
|
|
|
|
Post by kgchampion on Sept 14, 2017 2:55:25 GMT -5
Now they're gonna sit on these and say high end rings don't sell. Whatever. Don't really care for that Goldberg either. I understand the appeal, but not worth $99. Like I said in the other post, I just hope Wicked Cool Toys has some kind of plan to modernized the ASR for those who own it already. I plan on keeping mine for awhile. That's my fear: tgat this won't sell as well as they hoped and they'll say elite rings don't sell. Which I'm sure it would sell great if they had better turnbuckles and more accurate scale and not so absurdly expensive (premium price for less than premium ring? WTF?). Or equally bad is it does sell well and they keep churning out incorrectly scaled rings and never fix it. WCT could create new posts that are shaped like the oversized current one that snaps into place, but has an enlongated bottom that covers the black part of the base. And a clear plastic cover that slides over the apron giving it an illusion of being an LED board. Just a simple idea off the top of my head. |
|
|
|
Post by AlexWestCollects on Sept 14, 2017 9:12:42 GMT -5
I saved rewards and had a coupon. Picked up the set for $66 and sold the ring. Def not worth $100 price point. Goldberg is nice but I had to pass on a few due to bad paint apps on Goldberg. I feel like mattels quality is just not what it used to be.
|
|
|
|
Post by charabro on Sept 14, 2017 9:18:42 GMT -5
Is the head molded in skin tone or grey?
|
|
|
|
Post by wweretrocollector on Sept 14, 2017 9:46:23 GMT -5
Awesome thanks for the review it was helpful.
|
|
|
|
Post by GreyHaze:Big Bad Booty Daddy on Sept 14, 2017 11:18:16 GMT -5
I think the only thing I like about this ring is the size. For the price tag it should have removable turnbuckles, accurate sized ringposts and not a solid piece ringstep. It's literally a step back in that aspect. In terms of the Goldberg, I see the likeness from the front view. However, the overly bushy goatee kills it for me and the cranium looks like an ape's head from the side view. A little gloss on the boots would of also made this figure pop too. I'm hoping that when they do release a fb Goldberg they go all out on it. A new headscan (I still believe jakks has the best one so far), a new torso with bigger traps, they could reuse the legs on this one (or just make a brand new body mold since Goldberg's attire is simplistic) and last but not least gloss his boots. Also, has anyone repainted this head and tried to make him younger (brown goatee and eyebrows)?
|
|
|
|
Post by ARUN on Sept 14, 2017 11:58:29 GMT -5
Too bad about the ring Goldberg looks awesome. Thanks for posting. If this hits Canada I'll be picking one up
|
|
|
|
Post by chowmeinkane on Sept 15, 2017 0:31:23 GMT -5
I want Goldberg sooo bad, but im not slimy enough to replace the figure.
I need a solo release asap, screw the ring
|
|
PVA
Main Eventer
Too hot to handle and too cold to hold
Joined on: Apr 12, 2004 15:33:20 GMT -5
Posts: 3,189
|
Post by PVA on Sept 15, 2017 5:22:24 GMT -5
The scale of the ring is more accurate then wicked cool toys which is just way too big.
Not having flexibility in changing brand and Limiting to only a RAW ring kinda sucks but I could get past it.
However, The rope height is really the deal breaker.
So close, Mattel.
|
|
|
|
Post by RybackV1 on Sept 15, 2017 6:51:07 GMT -5
I love this ring. Way better than the ASR. Scale is much better and it's so much more sturdy. The rope height doesn't bother me at all and all my grooves fit in perfectly.
|
|
|
|
Post by Lorenzo Alcazar on Sept 15, 2017 7:06:36 GMT -5
I'm sticking with the original Mattel ESR. I've updated it with WWE Network turnbuckle pads, and RAW WWE Network ring apron.
I can't pay $100 for a ring that has spring ring ring posts that the ropes barely reach the medium sized wrestlers waist. On taller figures like Nash and Undertaker, doesn't even reach their waist.
I'm hedging my bets that in 2018 we get better Goldberg figures that I can buy individually.
|
|
