|
Post by AttitudeLegendCollector on Jul 18, 2019 8:19:41 GMT -5
Hi all,
So I bought a Detolf and I really want to raise it - I've done so much research but can't seem to find anyone who has used this to raise a singular Detolf....https://www.ikea.com/gb/en/p/besta-frame-black-brown-60245962/
I wanted to put a singular detolf on top of this to raise it up and I had the idea of putting my replica winged eagle in the cubby hole at the bottom, I personally think it would look pretty good but I'm just scared about whether the Besta will be strong enough to hold it without collapsing. The website says max load 20kg horizontal but I'm not sure that relates to what I want to do and also some people have said IKEA are just overly cautious.
Im pretty sure some people out there are using the above but the double sided version to fit two detolfs but for now and for this display I just want a singular detolf display. The website says the same for the double 20kg max weight - I understand the retold weighs about 37kg without anything in it!?
Has anyone used this to raise up a singular retold successfully? Can you strengthen it? or has anyone successfully raised a Detolf successfully with anything else??
Any help would be appreciated!
|
|
|
Post by jayrod2009 on Jul 18, 2019 8:38:50 GMT -5
One Besta on its side is long enough to have two Detolfs placed on top. I DO NOT recommend this set up on carpet. But, if you take the risk, please anchor the detolfs into the wall. The display looks super clean too.
|
|
|
Post by AttitudeLegendCollector on Jul 18, 2019 8:58:57 GMT -5
One Besta on its side is long enough to have two Detolfs placed on top. I DO NOT recommend this set up on carpet. But, if you take the risk, please anchor the detolfs into the wall. The display looks super clean too. I didn't even consider the flooring, thanks man....the room does have carpet I'm looking to change the flooring to wood but not for a while. Would definitely look at fixing to the wall and maybe fixing the retold to the Besta unit but I just want to make sure it would hold the weight. Could be wrong but I don't think the besta shelf I've bought would be able to hold two detolfs...measurements are Width: 60 cm Depth: 40 cm Height: 38 cm and the width of one singular Detolf is 43cm? Do you have a Besta holding up a Detolf?
|
|
|
Post by CM Poor on Jul 18, 2019 9:15:09 GMT -5
I personally wouldn't recommend using anything but a fixed flooring fixture to raise a Detolf. I have an older model Detolf, and noticed since purchasing it several years ago that they've reduced the height on the shelf significantly. The old ones were super unsteady. They're not bottom heavy, as the weight is distributed pretty evenly throughout the construction, so the same weight anchoring the thing to the ground was also being relied upon to balance it at almost six feet high. Even with the shelves being shorter now, I can't imagine the weight distribution is much different.
I'd keep it on solid ground, personally.
|
|