|
|
Post by Back to the Codyverse on May 5, 2023 8:25:22 GMT -5
Can you push for another torso on future Cody ultimates? I think the Seth Rollins torso would be perfect for Cody.
|
|
billyboytoobs
Mid-Carder
Joined on: Aug 3, 2011 10:05:48 GMT -5
Posts: 418
|
Post by billyboytoobs on May 5, 2023 13:36:02 GMT -5
Steve,
After the headbangers have made it common knowledge about them getting legends contracts I was wondering -
Is there a reason why you can’t/don’t disclose the legends contracts list? Is it a legal thing or more down to the fact you’d be bombarded with fan requests??
|
|
|
|
Post by Action Figure Attack on May 5, 2023 15:41:57 GMT -5
Hello Steve, I saw the "slim" version of the stage on Instagram, but did not see the dimensions posted. Can you please let us know the dimensions if you still have them? When looking for shelving/bookcases, I'm having issues finding a shelf/bookcase that is 20 inches in width. I think the biggest shelf was 15 inches. For the slim or regular stage, is it built so that some of it can hang off of a shelf? For example, if a bookcase is a couple inches away from a wall, will you be able to have the stage pushed against the wall without pieces falling down between the space for the wall vs. the bookcase? Slim measurements are: 10 inches deep (cords not plugged in back), 11.5 inches deep (cords plugged in back) by 40 inches wide by 20.5 inches high. If there’s a small gap between the shelf and the wall, nothing is really small enough to fall down the back. |
|
|
|
Post by Action Figure Attack on May 5, 2023 15:51:14 GMT -5
Tell me what you want to know specifically and I’ll try to measure the stage when I’m at the office again. Awesome, thank you! Would be great to know: - Height and width of the entrance stage (not sure if its attached to the staging floor blocks, so I guess with and without them if its not glued onto those) - Same as above for the structure with the banners Essentially, I'm just looking at display options and whether there might be cabinets to hold this. I made a small amend to my Detolf to fit the New Gen stage in, so just getting ahead of it. Thanks again! Actual entrance at the front measure 16 inches wide by 12.5 inches high. The back girder do insert into the stage itself for stability. The banner frames measure 9.5 inches wide by 18.5 inches high. They’re also plugged into the bases for stability. The plugs are roughly under an inch deep. They’re currently a separate piece from the girders so you technically don’t have to plug them into the stage base. As of this point in development anyway. |
|
eddiep
Mid-Carder
Joined on: May 4, 2020 0:27:51 GMT -5
Posts: 374
|
Post by eddiep on May 5, 2023 16:01:29 GMT -5
Good luck for today Steve. I’m not a WCW fan but I really hope it gets backed to keep momentum on crowdfunds. It’s looking promising!
As a coliseum collection super fan, could we see other places sell waves, like Ringside for instance, to get more figures out per year? What with ringside now doing larger shipper boxes for Defining Moments, it doesn’t seem too much of a stretch to offer Coliseum too?
Thanks Steve
|
|
|
|
Post by Action Figure Attack on May 5, 2023 16:02:47 GMT -5
Steve, kind of an out there question but i think it's a good one. Theoretically, if you wanted a figure for your own personal collection, but you didn't have the rights to mass produce it to the public, could you have like a 1 of 1 made? For instance if you wanted a ultimate cm punk for your own personal collection, could it be made for you personally, because i assume the "licensing" aspect only has to do with mass producing or selling of the figure. Nah. Couldn’t do that. I’d have to commission a customizer to make one like anyone else. |
|
greer7769
Jobber
Joined on: May 4, 2023 10:09:14 GMT -5
Posts: 29
|
Post by greer7769 on May 5, 2023 16:45:10 GMT -5
Hey steve can we extend the end date till monday today is my birthday and payday at work but cant put no money in till tomorrow but really want to back this stage im a huge wcw guy but dont have the money was hoping to use my bday money and part of this check to finish it
|
|
shawnscga
Superstar
Joined on: Dec 21, 2012 6:01:14 GMT -5
Posts: 615
|
Post by shawnscga on May 5, 2023 18:03:00 GMT -5
Hey Steve
Anything up your sleeve in the last coming hours of the fund to push it over the edge if needed? I don’t expect a figure to be added or anything, just hoping you guys might have a few ideas so we can get this funded! Thanks
|
|
|
|
Post by ImJoeGrizzlyBitch on May 5, 2023 18:28:38 GMT -5
Hey Steve Anything up your sleeve in the last coming hours of the fund to push it over the edge if needed? I don’t expect a figure to be added or anything, just hoping you guys might have a few ideas so we can get this funded! Thanks Maybe like adding Warrior with Mysterio/Big Bad Booty Daddy then just charge everybody an extra $35 and maybe extend the fund to another day? Give people over seas free shipping? Maybe Mattel/Ringside join together and buy the 1500 to get us over and then just sell them on y’all’s website? Again, please make this happen. Go down swinging |
|
hickenbottomkid
Mid-Carder
Joined on: Jul 24, 2022 11:45:50 GMT -5
Posts: 75
|
Post by hickenbottomkid on May 5, 2023 19:19:01 GMT -5
Hi Steve any reason UE14 Roman is so scarce haven’t been able to find one at retail and Amazon is out as well every other recent Ultimate has been plentiful but not the Tribal Chief.
|
|
|
|
Post by Action Figure Attack on May 5, 2023 19:56:39 GMT -5
Hi Steve, I really want some old school legends. I understand they may not sell well on their own but would consider doing something like a popular wrestler and who trained them to be a wrestler in a two pack. I really want the full history of the WWWF, WWF and WWE in my collection. For example: Mick Foley & Dominic DeNucci Triple H & Killer Kowalski Bret Hart & Stu Hart Shawn Michaels & José Lothario Kurt Angle & Dory Funk Jr. Thank You! Just need them on the Legends roster. If that ever happens, we’ll figure out a way to get them into the line. |
|
|
|
Post by Action Figure Attack on May 5, 2023 19:57:05 GMT -5
Hi Steve any reason UE14 Roman is so scarce haven’t been able to find one at retail and Amazon is out as well every other recent Ultimate has been plentiful but not the Tribal Chief. He’s not scarce, just popular. |
|
|
|
Post by Action Figure Attack on May 5, 2023 19:58:41 GMT -5
Hey Steve Anything up your sleeve in the last coming hours of the fund to push it over the edge if needed? I don’t expect a figure to be added or anything, just hoping you guys might have a few ideas so we can get this funded! Thanks This is it. Everyone involved went above and beyond to do everything realistically possible to get this funded. It’s in our hands as collectors now to get it to the finish line. I appreciate everyone who’s been positive, spread the word, and provided respectful constructive feedback. If this stage is meant to be and there are enough people who want this thing to happen, it’ll happen. Let’s do this! |
|
|
|
Post by Action Figure Attack on May 5, 2023 20:04:29 GMT -5
Good luck for today Steve. I’m not a WCW fan but I really hope it gets backed to keep momentum on crowdfunds. It’s looking promising! As a coliseum collection super fan, could we see other places sell waves, like Ringside for instance, to get more figures out per year? What with ringside now doing larger shipper boxes for Defining Moments, it doesn’t seem too much of a stretch to offer Coliseum too? Thanks Steve They’ll remain a MC exclusive for now. I get the desire for more sets. Demand for the ones we do is ultimately going to dictate the line expanding. |
|
|
|
Post by Action Figure Attack on May 5, 2023 20:05:23 GMT -5
Can you push for another torso on future Cody ultimates? I think the Seth Rollins torso would be perfect for Cody. Will do. |
|
slapnutsworld
Mid-Carder
Joined on: Jul 23, 2022 18:35:51 GMT -5
Posts: 124 
|
Post by slapnutsworld on May 5, 2023 20:11:43 GMT -5
Steve, will the UE 18 Randy Savage be the "MACHO MAN" or "MACHO KING", on the packaging?
And does the figure have the wrist gauntlets? Because I can't tell since he has that beautiful jacket on
Thank you. #backthestage
|
|
hickenbottomkid
Mid-Carder
Joined on: Jul 24, 2022 11:45:50 GMT -5
Posts: 75
|
Post by hickenbottomkid on May 5, 2023 20:21:13 GMT -5
Anyway of getting the classic big Yokozuna sized casket from Royal Rumble ‘93 and with the Rest in Piece deco maybe with an new elite Paul Bearer
|
|
|
|
Post by ImJoeGrizzlyBitch on May 6, 2023 0:14:44 GMT -5
Can we extend the date on the Crowd funder? I mean why not
|
|
|
|
Post by GreyHaze:Big Bad Booty Daddy on May 6, 2023 0:53:32 GMT -5
Action Figure Attack if our beloved Nitrous stage gets funded, could you in anyway push for a WCW flame mat and guardrail set? Having the stage and ring leaves room for such marvelous accessories. Also Steve, I love you. Thanks for you for work and for pushing this Nitro stage. I love WCW.
|
|
nwofoundation
Mid-Carder
Previously rvd+sabu=greatness
Joined on: Jul 10, 2022 15:52:30 GMT -5
Posts: 67
|
Post by nwofoundation on May 6, 2023 2:29:18 GMT -5
Steve, is there any way we can extend the WCW crowdfund? Or is there a solution to those who still want it? For example, can we do a make for order for at least the stage only, even if it costs more than $400? Some people are willing to pay for it. Thanks.
|
|
