|
|
Post by attitudeerajunkie15 on Nov 7, 2020 23:35:09 GMT -5
So, we have received a ton of kane figures as we all know, who knows what Mattel will decide but we can only assume we may get a ultimate kane, if we do, which attire would you want? What fixes would you like to see, I see a lot of chatter regarding kane so here’s my take. Necessary fixes: 1. Lace less boots, if we get an u.e we absolutely finally need laceless boots. 2. New mask sculpt, my opinion on kane figures, majority of the masked ones, kane looks like the mask IS his face, in a weird way, it does not look like it’s supposed to be a mask, first I think there should be more beard exposed at the chin, second we need his eyes to be darkened around/under the mask, and lastly we should get some hair over the mask, as well as other heads with the hair “wet” and on the sides where we can see the mask strap very clearly and his ears or one ear with the other covered by hair. 3. BIGGER TORSO, this is contingent upon the era it reflects. If it’s 97-2002, especially, we need a larger torso and arms then we’ve gotten. 4. The neck, the costume needs to be cut off lower on his neck, need more skin exposed on the neckline instead of the whole neck being painted red or black.      |
|
shark
Superstar
Joined on: Sept 11, 2020 12:45:01 GMT -5
Posts: 501
|
Post by shark on Nov 8, 2020 10:19:41 GMT -5
Kane fanboy here. We absolutely need a UE for him, and I wouldn't doubt it's already planned as well as a UE Undertaker. I agree with pretty much everything, especially about the mask always looking like it's his whole head instead of a separate piece. We definitely need a bigger body and arms to reflect just how huge he was at the time, just hoping they aren't lazy and decide to use old parts. If we don't get a new mask mold, with a goatee that would be a giant fail.
They also said that the UE figures have been already been decided for the year of 2021 and deep into 2022, I fully expect Kane to be one of them. Let's hope they deliver.
|
|
Deleted
Joined on: Nov 23, 2024 21:40:07 GMT -5
Posts: 0
|
Post by Deleted on Nov 8, 2020 10:29:32 GMT -5
Kane fanboy here. We absolutely need a UE for him, and I wouldn't doubt it's already planned as well as a UE Undertaker. I agree with pretty much everything, especially about the mask always looking like it's his whole head instead of a separate piece. We definitely need a bigger body and arms to reflect just how huge he was at the time, just hoping they aren't lazy and decide to use old parts. If we don't get a new mask mold, with a goatee that would be a giant fail. They also said that the UE figures have been already been decided for the year of 2021 and deep into 2022, I fully expect Kane to be one of them. Let's hope they deliver. They really can't reuse old parts for him unless they're gonna use the Brock torso and while I probably wouldn't put it past them, I think they'd probably do a new torso for Ultimate Kane. |
|
|
|
Post by Evil Abed on Nov 8, 2020 10:32:46 GMT -5
The best thing they could have done but they’re not going to do now since it just came out. Would be to have done 02-03 Kane.
3 Heads — Masked (and sculpted with goatee for the love of god), intial unmasking reveal, and bald
Black Head Towel
Full Body Chain/Handcuffs
Raw World Tag Title
If you wanna get crazy replace the Tag Title with a Gas Can.
It’s sad to me they’ve done two elite versions of 02-03 Kane and screwed them up both times with the head sculpt.
|
|
shark
Superstar
Joined on: Sept 11, 2020 12:45:01 GMT -5
Posts: 501
|
Post by shark on Nov 8, 2020 10:38:36 GMT -5
The best thing they could have done but they’re not going to do now since it just came out. Would be to have done 02-03 Kane. 3 Heads — Masked (and sculpted with goatee for the love of god), intial unmasking reveal, and bald Black Head Towel Full Body Chain/Handcuffs Raw World Tag Title If you wanna get crazy replace the Tag Title with a Gas Can. It’s sad to me they’ve done two elite versions of 02-03 Kane and screwed them up both times with the head sculpt. DOD Kane is the closest to what you described I guess, so idk if they'd do that as an UE but who knows. I'll be after that DOD one anyways though. |
|
|
|
Post by Evil Abed on Nov 8, 2020 10:40:39 GMT -5
The best thing they could have done but they’re not going to do now since it just came out. Would be to have done 02-03 Kane. 3 Heads — Masked (and sculpted with goatee for the love of god), intial unmasking reveal, and bald Black Head Towel Full Body Chain/Handcuffs Raw World Tag Title If you wanna get crazy replace the Tag Title with a Gas Can. It’s sad to me they’ve done two elite versions of 02-03 Kane and screwed them up both times with the head sculpt. DOD Kane is the closest to what you described I guess, so idk if they'd do that as an UE but who knows. I'll be after that DOD one anyways though. I have the OG RSC Exclusive as well it just kills me to no end that twice now they’ve done the fig but haven’t done a proper mask head sculpt. Instead we keep getting the “versatile” mask on the side option but it doesn’t fit with his run, he was never clean shaven with the mask, and it comes off way to easy. It’s something stupid but it’s annoying. |
|
|
|
Kane u.e
Nov 8, 2020 10:44:33 GMT -5
via mobile
Post by GreyHaze:Big Bad Booty Daddy on Nov 8, 2020 10:44:33 GMT -5
I’d love both! A debut and 2001 version, however I can’t see them releasing both one after the other. It’s weird and maybe I’m in the minority, but the torso for the elite 12 Kane never really bothered me, same with the arms. What really threw me off was the mask sculpt and boots. Now, when you have the 2001 Kane next to the elite 12, it just looks odd in comparison. The torso is way too thin and the head just does not suit the body in comparison. I’d love for Mattel to actually give us a 2001 version with three new mask sculpts (yes three). If I recall correctly, Kane had different varieties of the same mask which is why they all looked different. One sculpt could be primarily red, second could be the traditional black and red with his ears showing and the last one could either be his all black mask or with a bit of hair overlapping the mask. I would love to see molded on mesh detail. It’s something Jakks did with their r3 and to this day I believe it’s the best Kane mask scan. Glossy lace less boots are also a must too. Wider torso and bigger arms and there you have it. I wouldn’t even mind any accessories if he actually had all these details. Kane was my favorite WWF wrestler and Sting was just my favorite of all time. I feel like both haven’t had their definitive figure.
|
|
shark
Superstar
Joined on: Sept 11, 2020 12:45:01 GMT -5
Posts: 501
|
Post by shark on Nov 8, 2020 10:47:44 GMT -5
DOD Kane is the closest to what you described I guess, so idk if they'd do that as an UE but who knows. I'll be after that DOD one anyways though. I have the OG RSC Exclusive as well it just kills me to no end that twice now they’ve done the fig but haven’t done a proper mask head sculpt. Instead we keep getting the “versatile” mask on the side option but it doesn’t fit with his run, he was never clean shaven with the mask, and it comes off way to easy. It’s something stupid but it’s annoying. Yeah I agree, that's actually my grail figure and I got it recently. Loose but complete with the accessories and whatnot. I actually really like it. Was thinking about getting a cheap Kane on eBay and painting a goatee on the head, and swapping it onto the RSC one. |
|
|
|
Post by WCWThunderRosa on Nov 8, 2020 11:06:05 GMT -5
They should do the 2000 mesh attire. It’s close enough to debut Kane to satisfy the never ending demand for that look while also being a new attire
|
|
|
|
Kane u.e
Nov 8, 2020 11:31:13 GMT -5
via mobile
Post by Mongo Bears on Nov 8, 2020 11:31:13 GMT -5
I want 99 Kane with a new mask sculpt
|
|
kinnikuman
Main Eventer
Joined on: Feb 6, 2020 21:42:25 GMT -5
Posts: 4,674
|
Post by kinnikuman on Nov 8, 2020 11:33:47 GMT -5
I don't have/want any Kane so I can't be of help. I do have a custom Unabomb though.
|
|
jacguitarist
Main Eventer
Joined on: Jul 24, 2007 18:26:49 GMT -5
Posts: 1,446
|
Post by jacguitarist on Nov 8, 2020 12:35:39 GMT -5
Absolutely yes yes yes 1000x yes
I really really hope we get a UE debut Kane sooner rather than later.
The nice thing is they'd be forced to make a new torso to incorporate the UE articulation scheme anyways, so that would cover the need for a bigger torso.
But the thing I've constantly griped about is the existing masked head sculpt they've used since Elite 12. I like the idea of essentially getting around the lack of different facial expressions by changing his hair styles...1 with hair down on each side of his head, 1 with hair down with strands in his face, and 1 with hair slicked back. I think that would pretty much cover any type of early Kane look you'd want to get
|
|
|
|
Post by attitudeerajunkie15 on Nov 8, 2020 15:40:02 GMT -5
Yes, and the red they use needs to be like 2 shades darker red, and his mask needs to look worn and very dark, the Kane’s they’ve put out, the reds are super bright and the masks just look ridiculous , hopefully they figure it out
|
|
|
|
Post by DZ: WF Legacy on Nov 8, 2020 16:09:35 GMT -5
I definitely want to see a mesh old school outfit for him. If they wind up doing this, his accessories could be translucent fire that you put on the ring ropes for an inferno match.
|
|
|
|
Post by ztj_wwf on Nov 8, 2020 16:48:57 GMT -5
That mesh outfit would be a great choice. Perhaps another could be debut attire with the cape that he wore at house shows and in photoshoots around that time.
|
|
|
|
Post by Back to the Codyverse on Nov 8, 2020 16:49:59 GMT -5
If it’s the full mask sculpt then we need a new mold. Mirror Jakks
R3 and make sure he has shiny boots and a beefier torso
If it’s 2002-2003 then we need a sculpt with the mask molded on. Beefier torso and knee pads
|
|
isloth
Main Eventer
Joined on: Feb 14, 2019 14:55:52 GMT -5
Posts: 1,066
|
Kane u.e
Nov 8, 2020 16:54:31 GMT -5
via mobile
Post by isloth on Nov 8, 2020 16:54:31 GMT -5
I’d definitely be on board for a UE Kane, with the earlier the look for the character the better.
It makes sense in my head but maybe not, but they could have swappable covered and uncovered left arms.
|
|
|
|
Kane u.e
Nov 8, 2020 19:15:01 GMT -5
via mobile
Post by WCWThunderRosa on Nov 8, 2020 19:15:01 GMT -5
I’d definitely be on board for a UE Kane, with the earlier the look for the character the better. It makes sense in my head but maybe not, but they could have swappable covered and uncovered left arms. That wouldn’t work, the attires don’t line up |
|
jokerjohn
Main Eventer
Joined on: Oct 14, 2019 17:38:00 GMT -5
Posts: 1,757
|
Kane u.e
Nov 8, 2020 19:26:59 GMT -5
via mobile
Post by jokerjohn on Nov 8, 2020 19:26:59 GMT -5
I’d definitely be on board for a UE Kane, with the earlier the look for the character the better. It makes sense in my head but maybe not, but they could have swappable covered and uncovered left arms. That wouldn’t work, the attires don’t line up Didn't he have both arms covered for the inferno match? Either way for accessories he could have a spare head with different hair or just cram a Paul Bearer in there somewhere lol. |
|
|
|
Kane u.e
Nov 9, 2020 11:53:40 GMT -5
via mobile
Post by TheHitmanKid on Nov 9, 2020 11:53:40 GMT -5
Ultimate Kane in this attire would be awesome. Hopefully the red isn't too bright and hopefully we can get a bigger torso too. |
|
