|
|
Post by screech on Aug 30, 2021 17:52:46 GMT -5
mine is perfect
|
|
|
|
Post by PJ on Aug 30, 2021 17:58:06 GMT -5
Maybe you have bad luck. I have three of the Austin figure and all came with three different heads.  |
|
WWE453456
Mid-Carder
Joined on: Jul 23, 2021 18:07:34 GMT -5
Posts: 282
|
Post by WWE453456 on Aug 30, 2021 18:01:13 GMT -5
I can only explain this frequency to myself because the standard head is very similar to the laughing head.
|
|
|
|
Post by cableV on Aug 30, 2021 18:02:36 GMT -5
My Austin had the 3 different heads, but only 1 was manufactured to be swappable.
|
|
|
|
Post by Midnight: Dark Knight on Aug 30, 2021 19:20:02 GMT -5
After reading this i had to go check mine and i thought i got took too, then I finally realized mine were actually different. those 2 smiling heads are soooo similar, with one just having the bottom teeth showing and the other not. No wonder the factory mistakes them
|
|
deadman89
Main Eventer
Joined on: Jun 17, 2021 19:37:24 GMT -5
Posts: 1,013
|
Post by deadman89 on Aug 30, 2021 20:15:11 GMT -5
My Austin had the 3 different heads, but only 1 was manufactured to be swappable. same, just discovered this tonight |
|
|
|
Post by RybackV1 on Aug 31, 2021 1:45:38 GMT -5
Yeah I thought I had two of the same at first as well until further inspection
|
|
|
|
Post by casanova on Aug 31, 2021 4:09:20 GMT -5
Do we already have a mod for STC middle finger hands?
|
|
peterjp2
Main Eventer
WF 10+ Year Member
24 ref's and counting, 944 on eBay
Joined on: Feb 8, 2006 10:18:07 GMT -5
Posts: 1,735
|
Post by peterjp2 on Aug 31, 2021 11:51:45 GMT -5
My Austin had the 3 different heads, but only 1 was manufactured to be swappable. same, just discovered this tonight Mine is like that as well. Does anyone have an Austin were all three heads are swappable? |
|
|
|
Post by PJ on Aug 31, 2021 12:48:14 GMT -5
same, just discovered this tonight Mine is like that as well. Does anyone have an Austin were all three heads are swappable? I am not understanding the question. I said in another UE9 thread that Flair and Austin were the first two UE figures that the heads actually popped on and off without heating them. The swapping was smooth on all the heads. |
|
deadman89
Main Eventer
Joined on: Jun 17, 2021 19:37:24 GMT -5
Posts: 1,013
|
Post by deadman89 on Aug 31, 2021 13:04:40 GMT -5
Mine is like that as well. Does anyone have an Austin were all three heads are swappable? I am not understanding the question. I said in another UE9 thread that Flair and Austin were the first two UE figures that the heads actually popped on and off without heating them. The swapping was smooth on all the heads. I think 3 of us who own UE Austin’s have an issue where the head that is on the figure has the easy pop on and off head, while the other 2 heads simply have the hole that once it’s on, without heating it won’t pop on and off easily |
|
|
|
Post by PJ on Aug 31, 2021 13:39:45 GMT -5
I am not understanding the question. I said in another UE9 thread that Flair and Austin were the first two UE figures that the heads actually popped on and off without heating them. The swapping was smooth on all the heads. I think 3 of us who own UE Austin’s have an issue where the head that is on the figure has the easy pop on and off head, while the other 2 heads simply have the hole that once it’s on, without heating it won’t pop on and off easily Odd the Austin & Flair are the first UE figures that the heads all switch smoothly for me. Every other UE I have gotten you need to heat the other heads to get them to pop on. |
|
deadman89
Main Eventer
Joined on: Jun 17, 2021 19:37:24 GMT -5
Posts: 1,013
|
Post by deadman89 on Aug 31, 2021 15:14:51 GMT -5
I think 3 of us who own UE Austin’s have an issue where the head that is on the figure has the easy pop on and off head, while the other 2 heads simply have the hole that once it’s on, without heating it won’t pop on and off easily Odd the Austin & Flair are the first UE figures that the heads all switch smoothly for me. Every other UE I have gotten you need to heat the other heads to get them to pop on. my flair is fine, and so is my savage. Honestly I would have never noticed the Austin thing until I read this and went to change him outta the shirt into the vest |
|
|
|
Post by attitudeerajunkie15 on Aug 31, 2021 15:50:11 GMT -5
Mines are fine also. But a common problem I’m experiencing with every ultimate I get is the additional heads don’t seem to lock onto the ball joint correctly so it just comes off, which is making me like ultimates less and less going forward
|
|
peterjp2
Main Eventer
WF 10+ Year Member
24 ref's and counting, 944 on eBay
Joined on: Feb 8, 2006 10:18:07 GMT -5
Posts: 1,735
|
Post by peterjp2 on Aug 31, 2021 20:43:00 GMT -5
Mine is like that as well. Does anyone have an Austin were all three heads are swappable? I am not understanding the question. I said in another UE9 thread that Flair and Austin were the first two UE figures that the heads actually popped on and off without heating them. The swapping was smooth on all the heads. Two out of the three heads on mine have the regular head mold, not the UE swappable neck insert.  |
|
|
|
Post by PJ on Aug 31, 2021 21:01:41 GMT -5
I am not understanding the question. I said in another UE9 thread that Flair and Austin were the first two UE figures that the heads actually popped on and off without heating them. The swapping was smooth on all the heads. Two out of the three heads on mine have the regular head mold, not the UE swappable neck insert. Mine are like that as well (same with Flair) but they all pop on and off better than any past UE figures. And don’t suffer from giraffe neck syndrome. |
|
deadman89
Main Eventer
Joined on: Jun 17, 2021 19:37:24 GMT -5
Posts: 1,013
|
Post by deadman89 on Aug 31, 2021 21:14:21 GMT -5
Two out of the three heads on mine have the regular head mold, not the UE swappable neck insert. Mine are like that as well (same with Flair) but they all pop on and off better than any past UE figures. And don’t suffer from giraffe neck syndrome. this is exactly why my Austin looks like, but my flair, both heads have the thicker piece that allows for quick swapping without heating or forcing |
|
|
|
Post by shanieomaniac on Sept 1, 2021 1:09:24 GMT -5
I just looked at mine and, yeah, my Austin heads look like this too. However, I am able to swap the heads on all of them just fine. Mine is currently sporting the neutral expression head and, yeah, just tested, head goes off and on just fine despite not being molded like the removable ones.
|
|
jokerjohn
Main Eventer
Joined on: Oct 14, 2019 17:38:00 GMT -5
Posts: 1,758
|
Post by jokerjohn on Sept 1, 2021 9:59:07 GMT -5
So I just took a closer look at my figures after reading this post, I have three of Austin and just noticed one of my hats that is supposed to have a skull says Usos on it 🤣 should I get in contact with Mattel to try and get a replacement.
|
|
peterjp2
Main Eventer
WF 10+ Year Member
24 ref's and counting, 944 on eBay
Joined on: Feb 8, 2006 10:18:07 GMT -5
Posts: 1,735
|
Post by peterjp2 on Sept 1, 2021 10:04:39 GMT -5
So I just took a closer look at my figures after reading this post, I have three of Austin and just noticed one of my hats that is supposed to have a skull says Usos on it 🤣 should I get in contact with Mattel to try and get a replacement. That is an odd one. unfortunately Mattel doesn't have replacement parts for anything it seems. |
|
