|
|
Post by unclerico05 on Sept 20, 2007 13:42:09 GMT -5
I have an older van dam figure and it's pretty short.
are there any regular height van dam figures out there?
i'm looking for one.
|
|
|
|
Post by jayrod on Sept 20, 2007 13:44:39 GMT -5
ECW Series 1 is pretty good.
|
|
|
|
Post by Rated [R] NinJa on Sept 20, 2007 14:02:00 GMT -5
There aint any RVD's with the taller kickpad mould (AD24 Undertaker, ECW1 CM Punk) so this means all his figs would be short... The DA5/6/ KB toys exclusive are too tall if you compare it with RAs, but it should be fine with DAs. I suggest just doing a lower legs swap with any RVD and anyone with tall kickpads.
Rated R NinJa
|
|
|
|
Post by chrishero on Sept 20, 2007 14:02:20 GMT -5
BOECW and the RTWM one in red and black are pretty much the tallest I believe. They have the laced boots though, not the kickpads. Shame Jakks never made a proper RVD. If you want one with the correct kick pads you have to make it yourself by doing a lower leg switch with... I don't know, let's say Chris Masters.
|
|
|
|
Post by JCF on Sept 20, 2007 14:49:40 GMT -5
ECW Series 1 is pretty good. Nah, It also has the short kickpad mold. Anyway, Please re-size your sig. It's huge |
|
|
|
Post by PJ on Sept 20, 2007 15:48:20 GMT -5
Any RA RVD figure using the small kicker pads mold will be short. And it's not just the pads that make him so short it's also the thinner thigh mold as well. As those thighs are also shorter than all the other thigh molds.
|
|
![Rated [R] NinJa Avatar](http://storage.proboards.com/530008/avatar/IDIYNeRTVZulhCPXFiqx.png)
